Skip to main content

Plaid Toggle Coat- Burda 6861

I love, love, love making coats.  There is something about the smell of the wool when you press it, how messy it all looks before it's lined, and then how, magically, it turns into something completely polished once the lining is turned right side out, that just makes me so happy.

I wanted to make my daughter, Serena, a long winter coat to cover her legs as much as possible while she waits for the train for her commute to work everyday.  She lives in Chicago, and the winter winds can be downright brutal there.   She picked out the fabric from my stash- a houndstooth plaid wool blend that I got for $4.99/yd from FabricMart years ago.

I only had 3 yards of this fabric, and searched for a pattern that would allow me to both match the plaid, and make a full length coat out of that amount of fabric.  That meant that it had to be cut pretty straight, with a very small overlap at the center front.  This eliminated a lot of patterns- anything double breasted with a even moderately flared skirt would not fit on this amount of fabric.  I found Burda 6861 which fit the bill.
I used the body length of View B with the sleeve and collar from view A.  The pattern shows it with zippers, buttons or snaps, so my version looks a little different because of the toggles, but it is the same pattern.


I was really impressed with the details of this pattern.   It had two piece sleeves, which give it a better fit.

The undercollar piece is cut smaller than the upper collar, enabling it to lay nicely, and the lining pieces are given separately. 

The only problem that I had with the pattern was that the sleeve cap was much too full for the armhole.   When I first put it in, it looked like a puff sleeve.  This was so weird, considering that everything else was so perfectly done with the pattern.  So, I reduced the sleeve cap height by about an inch, and then reduced the shoulder width another inch.  With both of these changes, I was able to ease in the sleeves without any obvious gathers.



I wanted to make it extra warm, so I underlined it with a flannel that was from my late Mom's stash.

To underline it, I cut all of the body pieces from the flannel, and then used a spray adhesive on the wrong side of the flannel pieces, and just finger pressed them to the wrong side of the wool pieces. So much easier than stitching all around each piece!  The adhesive I used was Mettler Web Bond TA 101.  I've been finding lots of uses for this stuff lately! I found it at our local Hancock fabrics store.


For the lining, I chose a polyester satin with a red floral print.  It picked up the colors of the wool perfectly.

She wanted toggle closures, which turned out to be the most expensive part of the coat.  I ordered them from Pacific Trimming in NYC.  They were $4 each, plus $9 shipping, for a total of $25.  That equaled the cost of the wool, lining and pattern!  But, I think that she was right.  The toggles really finish it off nicely.

I used a leather needle to sew them on, and even then, used the hand wheel to go around them because I was going through so many layers of thick wool, interfacing and leather.

The scarf is a 1/2 yard of microfleece in cranberry red made into an infinity scarf loop.  I love how it frames her face.

I hadn't sewn anything plaid in a while, and was pretty nervous about matching plaids with a princess seamed design.  But, amazingly, it all came together perfectly in the end. Woohoo!

Even with all of the wool, underlining, and lining, it's pretty lightweight, which is good. Nobody wants to lug around 10 pounds of coat!  Whether it's warm enough for a Chicago winter or not remains to be seen.   She's pretty happy with it, which makes me happy!

If you've never made a coat before, give it a try!  It's not nearly as hard as it looks, and you will love it!

-Ann

Comments

  1. Beautifully constructed coat, and clearly a very happy daughter. I'm curious, what sort of spray adhesive did you use (clever idea, too)? And, how did you sew these toggles on? Machine or hand? I ask because I just attached toggles to a jacket and didn't have the guts to do it with the machine - went the slow and poky hand stitching route - and would like to know if others are braver than I?

    ReplyDelete
    Replies
    1. Thank you! I used Mettler Web Bond TA 101- it is a temporary adhesive that our Hancocks store was promoting.
      And I did use the machine, but mostly used the hand wheel to attach the toggles. I too was afraid of breaking a needle, but the machine handled it just fine as long as I used the hand wheel to move forward.

      Delete
  2. I am very impressed with the way you have matched the plaid even in the sleeve

    ReplyDelete
  3. A beautiful coat for your lovely daughter!

    ReplyDelete
  4. Wonderful job on the coat! Love the lining. Your daughter looks very happy with it!

    ReplyDelete
  5. Wow...you matched the plaid so perfectly...it's a gorgeous coat!!! And your daughter is also gorgeous!

    ReplyDelete
  6. Wow, she could obviously be a great detective in that coat! Perfect for sleuthing.

    ReplyDelete
    Replies
    1. Haha! She just needs a pipe and hat and her own Dr. Watson!

      Delete

Post a Comment

Thanks for visiting my blog! I would love to hear your opinions! Please share your comments here.

Popular posts from this blog

What to Wear in Madagascar

To be honest, I have no idea what to wear in Madagascar, and this title may need to be changed to "what NOT to wear in Madagascar" in a few months.  We will have to wait and see.  My 22 year old daughter, Alyssa, left for the Peace Corps this week, and she will be stationed in Madagascar for the next 2 years and 3 months.  Yes, you read that right- TWO YEARS and three months!!! We are very proud of her for wanting to help make the world a better place, and for being fearless in doing so, but it will be a looooong time for Mama and Papa back home. Not knowing anything about Madagascar, the first step in figuring out what to pack was to figure out the weather and the cultural norms.  Madagascar is a very large island off the southeastern coast of Africa.  It's very, very unique in it's ecosystem, and has many species that are not found anywhere else in the world- most famously lemurs. Right now, it is experiencing it's rainy season, as you can see by the

Vogue 9305 Asymmetrical Tunics

It's April and we're expecting snow tonight.  Have we switched hemispheres?  Nevertheless, I am sewing with visions of warm sunny days.  And for those warm sunny days to come, I imagine sitting in the shade with a light breeze flowing through the air, enjoying a light beverage with friends.  Just close your eyes and you can imagine too.  What would you be wearing?  Well,  I love a dramatic asymmetrical tunic made of the softest linen.  As luck would have it, I found just the fabric in the "As Is" section in Fabric Mart's sales category.  With just some irregular dye marks on the selvage, it was marked down, but still completely usable.  It started out as a solid color, but I did an ombre dip dye process to get this look- more on that later! For my pattern, I chose Vogue 9305 , a tunic with a shaped hemline, and two styles of pants (I didn't make the pants).   This pattern must be the biggest bang for your time possible.  The tunic went tog

Grey Cashmere Coat Simplicity 3672

For the past few months, Fabric Mart has had the most gorgeous array of Michael Kors Wool Blend Coatings that I have ever seen!  During COVID stay at home time, I've been letting my gray grow out, and I thought that even though some of the delicious sounding shades like apricot and apple green would be beautiful, the heathered gray shade would be the most flattering to my gray hair and the most versatile for a winter coat.  And it was one of the coatings that listed Cashmere as one of the fiber components, so I was curious as to how that would feel.